Plastic Production Equipment

Plastic Extrusion
Extrusion Blow Moulding
Injection Stretch Blow Moulding
Downstream Equipment

TECNOMATIC

All our models are inspired by passion for extrusion and technology, which produce a wide range of extruders designed to fulfil the requirements of the pipe manufacturer, assuring high productivity and good melt omogeneity with particular care for energy and noise reduction. The high performance model ZEPHYR, in L/D 40 represents the state of the art of the gamma. Offered in gearless or traditional version the ZEPHYR series ensures outstanding performance with optimized power consumption.

Pipe Extrusion
A large selection of models and processing length for all pipe production requirements.

keito

Oct 12, 2022

Zephyr

Oct 12, 2022

The new extruder series in L/D 40 boasts an array of advanced technical solutions which make them unique models designed for pipe producers looking for even more focused energy saving machines, offering extreme output performance at lower melt temperatures. The innovation spans the entire series and includes new spiral grooved bush, screw and motors.

LEARN MORE

Oct 12, 2022

Zeus

Oct 12, 2022

ZEUS is the Tecnomatic’s innovative concept which introduces in the pipe extrusion’s market a gearless version, able to deliver unprecedented energy saving and unparalleled performance. The omission of gearbox, coupling and belts leads to a more compact engineering design of the machine and considerably reduces the maintenance requirement.

LEARN MORE

Oct 12, 2022

Mar 11, 2019

Vega

Mar 11, 2019

The VEGA series perfectly fit a wide range of pipe extrusion application. Reliable and tested in many standard or outperforming lines maximized and set new boundaries in pipe production. Designed for PE high performance extrusion, they are also well suited for the market of the corrugated pipes both PP and PE materials.
-
LEARN MORE

Mar 11, 2019

Atlas

Mar 11, 2019

ATLAS represent a reliable solution for many applications and it has been successfully installed in many countries around the world. It perfectly adapt as co-extruders for multi-layer pipes as well to fulfil the customer needs for continuous innovation and special requirements. The extruders are offered in many motors, screws, and custom fit solutions.
-
LEARN MORE

Mar 11, 2019

Mizar

Mar 11, 2019

MIZAR series is the standard offer for the extrusion of soft and rigid PVC and for co-extrusion use. These extruders are designed to meet all requirements for the production of spiraled, gardening pipes with fabric braid reinforcement, wire reinforcement or no reinforcement at all (e.g. food and beverage hose, potable water hose, marine hoses, wash down hoses etc etc.) and electrical corrugated pipes.
-
LEARN MORE

Mar 11, 2019

Ares

Mar 11, 2019

ARES is a complete new designed multi-purpose extruder for a low investment rate. It is an ideal solution for low output pipe application, single wall corrugated pipes as well as co-extruder for multilayer pipe extrusion.
-
LEARN MORE

Mar 11, 2019

Extrusion Lines
Quality & performance all along the line.

keito

Oct 12, 2022

PE LINES UP TO 3.000 MM

Oct 12, 2022

The lines, offered with a range up to 3.000 mm, are characterized by the adoption of latest innovative solution for the extrusion and with a high grade of automation and control. Mainly used in manufacturing water and gas pipes, all the lines can embed an additional pipe air cooling system (PAC), to enhance the pipe quality and to improve the output performance. Custom-made turnkey projects are designed for the market of plastic jacketed pipes for district heating, for mining with special layers or wall thickness and irrigation.
-
LEARN MORE

Oct 12, 2022

PE MULTILAYER LINES

Oct 12, 2022

Tecnomatic’s multilayer pipes are used extensively in Europe for installations using trenchless techniques or where no imported backfill is used. Tecnomatic has developed complete lines for the production of two, three or four layers pipes, even in large diameter size. A project in 1.200 mm three layers is the milestone of the multilayer production made by Tecnomatic. According to requirements, custom fit solution can be offered and engineered to maximize performance, cost saving, and space, without compromises on product quality.
-
LEARN MORE

Oct 12, 2022

PP MONO & MULTILAYER LINES

Oct 12, 2022

Polypropylene pipe has excellent chemical and abrasion resistance properties making it ideal for a range of application as hot & cold water, waste & drainage and industrial for transporting aggressive media. The competence and experience of Tecnomatic extend to this entire sector and cover the production of PP-R, PP-RCT monolayer pipes, with glass reinforcement (to bring additional benefits), or up to seven layers with innovative protection properties. The growing market of PP waste & soil pipes has also seen the company very active with the design of high output lines, especially as multilayer solution with mineral fillers. The top and bottom layers of these pipes are made of polypropylene and middle layer made of mineral filler polypropylene compounds which guarantees high mechanical resistance, excellent acoustic performance and resistance to the agents.
-
LEARN MORE

Oct 12, 2022

Mar 11, 2019

PE-X, PE-RT, PB, PA, ABS

Mar 11, 2019

Plastic pipe systems for heating and plumbing are available in a wide variety of materials. Crosslinked Polyethylene, commonly abbreviated PE-X is the most popular material for hot and cold water application. The success of this material is mainly related to its elevated temperature capabilities (up to 80°c), improved flexibility while resisting tensile deformation, resistance to abrasion and toughness. Heating pipes may come in multilayer solution, up to five, with EVOH oxygen barrier for protection from physical, chemical and UV damage or in Polybutylene (PB) and PE-RT materials. For this application Tecnomatic has specifically developed high speed lines based on the innovative die-heads Athena, made of radial spiral modules, which have great advantages: do not have any dead zones or edges where material could stop and grant an easy cleaning and rapid assembling/disassembling operation. Besides the manufacturing of heating plumbing system, the gained experience in small thermoplastic tubes has allowed the developments of tailor made solution for the market of technical tubes in PA, ABS, PU, PTFE for the industrial applications.
-
LEARN MORE

Mar 11, 2019

RTP LINE

Mar 11, 2019

Plastic pipes systems have been used very successfully for gas distribution and pressure up to about 10 bar, solving the corrosion and reliability issues of steel and ductile iron systems. Significant increase in pressure rating can be obtained by the development of multilayer and composite pipe constructions, to satisfy specific application requirements. Reinforce Thermoplastic Pipes (RTP) pipes have great potential to do this by meeting requirements for medium and even high-pressure transmission lines.The use of glass fibre, aramid tapes, Kevlar and even stainless steel chord reinforcement result in substantial advantages for the handling of corrosive fluids, for transport of oil & gas from deep sea fields and for the gas distribution system, replacing the use of steel pipes into the indoor and high pressure gas application up to 40 bar. Products are individually tailored to meet the specific requirements of the application and the production lines are designed in accordance to the number of layers and wrapping process; for different reinforcing materials or angles, selected in order to withstand internal or external pressure or longitudinal stress.
-
LEARN MORE

Mar 11, 2019

CORRUGATED PIPES

Mar 11, 2019

Corrugated pipe have become the chosen pipe for many drainage applications. The use of double wall corrugated pipes is increasing thanks to factors such as the pipe’s strength, durability, joint integrity, and long-term cost-effectiveness. Polyethylene and Polypropylene corrugated pipes are flexible in two directions, are chemical resistant, offer a good hydraulic flow and gain advantage over the rigid pipes made of traditional materials like clay stone or concrete. Light and material saving the pipes are easy handled for transport, installation cost and maintenance. Corrugated pipes are used in a wide variety of other applications. In smaller sizes, single wall and from additional materials like PA, TPE, TPR, PTFE are commonly used for cable protection, telecommunication, medical, automotive and food industries. Depending on which application and material, Tecnomatic offers a vast choice of extruders with processing length ranging from 24 L/D to 40 L/D to fit the customer’s need with the most efficient solution. For bigger diameter size (drainage & sewage) the adoption of gearless extruders, which guarantees a constant and specific output over the speed range even at high pressure but with extremely lower power consumption, is particularly interest.
-
LEARN MORE

Mar 11, 2019

SPA Magic

Magic has been in the market for the construction of Extrusion Blow Molding for plastic materials for over 60 years. Magic’s all-Electric technology is recognized by the market as the most advanced technology for processing plastic material.

Extrusion Blow Moulding
All-Electric EBM machine

The ME series has been defined by customers as "the series that the market needed". A range unique in the world, without a doubt, because for each model different versions are available to meet the customer's needs, including machines with increased stroke (LS-long stroke). It is not a result that is reached by chance, but is the result of years of research, investments, application and dedication in electrical technology. Construction carried out entirely in Italy (as for all our other machines), respecting our tradition of having solid machines, compact and reliable over time, with all the refined technological concepts dictated by the Magic experience in over 60 years of activity.

The ME series is undoubtedly unique in the world and with over 15 years of research and development in electrical technology to reach up to 55 Tons of closing force and increased strokes up to 1600 mm.

With over a dozen patents, state-of-the-art technology, intelligent and internet-connected systems, we at Magic can offer Small, Medium or Large machines depending on the request. Thanks to the precision offered by the technology (in the micrometer measurement unit) we can reach weights distributions never seen before, a stable process at each cycle, absence of contamination dictated by the machine and easy to use with the new UI between machine and operator.

Machine Benefits

The 3rd generation of All-Electric Blow Molding machine. Develop up to 60 Tons and 1600 mm clamping stroke.
Up to 65 Tons and with 30x less energy consumption and 27% more clamping force. We can develop high tonnage with very small energy requirement.
Up to 1600mm carriage stroke and the Long Stroke machine can offer a lot of benefits to produce a multicavity or big jerrycan container.
Using less energy, it can appreciate the energy savings. Use less energy for a more efficient machine.
Connect the machine for a fast troubleshooting and software update. Much easier and faster as never before.
Bigger means better. With the latest version of the magicOS it is possible to appreciate with a big screen what happen in the machine.

SPA Magic

Injection Stretch Blow Moulding
All-Electric ISBM machine

A major step forward compared to our oldest hydraulic Biaxial series. A load of customer-focused technology, which brings many benefits, ranging from energy savings to equipment savings; in addition to the linear movements of preforms and bottles we have also the blowing station in two different phases. Equipment savings will mean one more major plus; it’s very well known that the cost of the moulds has a significant impact on the cost of the machine and it’s payback in production. Our machine will rely on the new system, patented, complete with movable mould carrier to allow the cavities of the blowing mould to be reduced by 50%.

Let’s be clearer: to blow 6 preforms, traditional technology would require 6 blowing cavities, with a clamping force of approximately 30-35 ton. With our machine we have only 3 blowing cavities and the required clamping force is reduced by 40%. Specially designed for customers who need production in limited volumes, our machine will allow them to blow simultaneously two differently shaped bottles, with an apparently similar preform and different neck.

The machine can be equipped with in line or 90° injection station. This groundbreaking project will allow the machines to be upgraded and many new details to be introduced.
Magic further proves to lead the way in flexibility and awareness.

Machine Benefits

The 3rd generation of All-Electric Blow Molding machine. Develop up to 60 Tons and 1600 mm clamping stroke.
Up to 65 Tons and with 30x less energy consumption and 27% more clamping force. We can develop high tonnage with very small energy requirement.
Up to 250mm opening stroke and the linear movements for preform and bottles, with electro-pneumatic movements. It is possible to produce big container up to 8lt jar.
Using less energy, it can appreciate the energy savings. Use less energy for a more efficient machine.
Connect the machine for a fast troubleshooting and software update. Much easier and faster as never before.
Bigger means better. With the latest version of the magicOS it is possible to appreciate with a big screen what happen in the machine.

SICA SPA

Sica, is a globally renowned Italian producer of downstream equipment for plastic pipes: haul-offs, saws, belling machines, packaging machines, automation and ancillary equipment.